Description : The AMS160 (Audio Monitoring System) is a broadcast quality audio monitoring device for embedded analog audio. The compact size (1RU) and the loaded feature set have made the AMS-160 an indispensable tool for monitoring a wide assortment of embedded audio/analog audio signals in the broadcast, remote and post-production environments.

The AMS160 accepts both embedded and dual mono/stereo audio. A user selectable switch allows the operator to easily rotate through all the input sources.
Four LEDs will indicate which input source is selected. The output speakers allow the input source to be monitored more effectively, and a headphone jack is provided on the front panel. The speakers will be automatically muted in no time when the headphone jack is connected. Likewise, the speakers will resume speech when the heaphone jack is not connected. Both balance and volume controls are user-definable. The audio output may also be muted.
The AMS160 features two 26-segment LED level meters showing VU & PPM simultaneously for accurate level-metering. The extensive magnetic shield allows placement immediately adjacent to video monitors with no color impurities.

	1RU rack unit high
	2 SDI inputs (selectable group & sub-group)
	2 balanced analog inputs (1 stereo)
	2 reclocked SDI outputs；
	User selectable input sources
	User selectable input sources
	1 composite analog video output
	Two 26-segment tri-color level meters displaying VU & PPM simultaneously
	2 speakers
	Headphone jack, muted speakers
	Volume and balance control
	Quick and simple installation

Serial Digital Video Input (only for AMS160-D2 or AMS160-DA2) Quantity 2 Standards 259M-C 270 Mb/s; 525/625 auto sensing Connector BNC per IEC 169-8 Impedance 75 Ohms Return Loss >18 dB to 270MHz Signal Level 800mV ±10% Equalization Auto EQ to 300m Serial Digital Video Output (only for AMS160-D2 or AMS160-DA2) Quantity 2 Standards 259M-C 270 Mb/s; auto sensing Connector BNC per IEC Impedance 75 Ohms Return Loss >18 dB to 270MHz Signal Level 800mV ±10% DC Level 0.0 V ±0.5 V Overshoot <10% of amplitude (all outputs terminated) Rise and Fall Times 0.4 to 0.8ns(20% to 80% of amplitude) Jitter <500ps Composite Analog Video Output (only for AMS160-D2 or AMS160-DA2) Quantity 1 Standards NTSC, PAL-B Impedance 75 Ohms Return Loss >40 dB to 5.75MHz Quantizing 8 bits Frequency Response ±0.25dB to 5MHz Differential Gain <1.5% Differential Phase <1.2° Control Magnetic Shield <1 gauss any adjacent surface Chassis Type 1RU, 19" rack mounting ALC/Manual Switch Yes, with display

DC Offset ±50mV Chroma/Luma Delay <10ns to 5MHz Chroma/Luma Gain +/-1.5% Transient Response <0.5% K Factor Signal to Noise >54dB RMS to 5MHz Analog Audio Output Quantity 2 Sampling Rate 48KHz Connector 3-pin connector Input Operating Level +24,+20,+18,+12dBu Impedance >36 Kohms A/D Resolution 24-bit Level Meters Quantity 2 Display 26-segment Scale 0 to -48dBFS(AES), +12dB to -50dB(VU) Dynamics VU & PPM simultaneously Level Meter Threshold 0 VU to -12/-18/-20/-24dBFS, DIP Switch Selectable Midscale Resolution 2dB Speaker Output Quantity 2 Power 10W peak per speaker Freq. Response 80Hz-20KHz (+/-5dB) Headphone Output Quantity 1 ALC Gain +/-6dB to +12dB, 0.5dB step, with display Manual Gain -96dB to +12dB, 0.5dB step, with display Gain Source Yes, Ch1/Ch2/Ch3 & Ch2 Power Consumption <30W Power Supply 100-240 VAC, 50/60Hz Dimensions(HxWxD) 44.5x483x260mm

......................................................................................................................................................................................................

pdf download